Thank you for using Eclipse Power’s Location asset search tool. Before you continue, kindly note the following advice:

This information is to be used solely for the purpose for which it was requested and the copyright and other intellectual property rights in all material on our website is owned by us and may not be reproduced, online or offline, without Eclipse Power Networks prior written consent.

Please ensure a full search of area required as the search parameters provide results within 500m only.  Should you require a search covering a larger area e.g. 600m, please submit additional alternative reference points to fully cover the area of the plan.

Whilst Eclipse Power Networks takes all reasonable steps to ensure that the information available is correct, we do not guarantee the correctness nor completeness of material on this website as the material is supplied by others.  

If Eclipse Power Networks suspects any wrongful or suspicious activity, we hold the right to remove accounts from the website and will require an appeal process for this to be rectified.

Underground Assets

It is the responsibility of the on-site worker to be HSG47 compliant when undertaking works on site; and we strongly advise the use of a Cat and Genny assist the process.

Eclipse Power Networks or any other party (whether involved in producing, maintaining or delivering this website), shall be not liable or responsible for any kind of loss or damage that may result to you (or a third party) because of the information that has been provided.

This exclusion shall include servicing or repair costs and, without limitation, any other direct, indirect or consequential loss.

Above Ground Assets

Eclipse Power Networks also operates and maintains a range of above ground assets, including high voltage air insulated substations.

Any work taking place within the vicinity of our AIS sites, we encourage implementing the following minimum electrical safety clearances, which are used as a basis for the Energy Networks Association (ENA) TS 43-8. These standards have been agreed by the European Committee for Electrotechnical Standardisation and form part of the British Standard BS EN 50341-1:2012 Overhead Electrical Lines exceeding AC 1kV.

Impressed Voltage Management

If you are working adjacent to our live HV substations, we advise a safe system of work is established to control and manage associated risks of impressed voltages. Any conducting materials, or temporary positioned objects (i.e. cranes) installed near high-voltage equipment could be raised to an elevated voltage compared to the local earth, regardless of direct contact.

If any further information is required, please feel free to contact Eclipse Power Networks directly using the following email address:

assetenquiries@eclipsepower.co.uk

Thanks for your continued support and cooperation.